6400A Flame Photometer

1. easy to operate 2. high quality

 

 I. Introduction

 The product is deigned per as  the basic principles of the emission spectrum , widely used in agricultural fertilizers, soil analysis, concrete analysis, industry analysis and determination silicic acid, health care clinical testing and pathology.

 

 II.Product Features

 1. K, Na can be tested simultaneously , it also can test the lithium element

 2. LCD display, digital direct reading,

 3. With optional size of the flame function and automatic flame-out protection device .

 4. Simple, rapid analysis, the sample is less

 5. Gas:Liquefied petroleum gas

 

 III.The main technical indicators

 1. Stability:

 Consecutive injections of standard solutions, the biggest change in the  relative volume in 15S ≤ 3%

 Test once per  minute, test  six times in total, the biggest change in the  relative volume ≤ 15%

 2. Repeatability:

 Conduct 7 consecutive independent measurements for one standard solution,the relative standard deviation: ≤ 3%

 3. Linearity error:

 K: ≤ 0.005mmol / L (0.0100 ~ 0.0800) mmol / L

 Na: ≤ 0.03mmol / L (0.0500 ~ 0.400) mmol / L

 4. Detection limit:

 K: The detection limit ≤ 0.004mmol / L; Na: detection limit ≤ 0.008mmol / L

 5. Response time: Response time <8S

 6. Suction jet of samples:  Suction jet of samples <6mL/min

 Other:

 1. Complete Set: one host, one air compressor.

 2. Normal working conditions:

 Ambient temperature: 10 ℃ ~ 35 ℃

 Relative humidity: ≤ 85%

 The instrument should be placed horizontally on table with no vibration, avoid direct exposuring to bright light, keep away from  strong electromagnetic interference, no strong airstream.  

 Power supply: AC220 ± 22V, Frequency: 50HZ ± 1 HZ, with good ground connection.

 Rated power: 250W